Thermocouple measurement consists of a thermocouple wire with two dissimilar conductors (Copper-Constantan) joined at one end to form a hot junction. This end is sealed against corrosion and placed at the required locations of temperature measurement. The other end of the thermocouple wire is connected to a suitable thermocouple connector to form a cold junction.
The thermocouple readout displays a direct reading of the temperature at the installed location and automatically compensates for the temperature at the cold junction.
| Wire Type | T-Copper-Constantan |
| Wire Insulation | PFA TeflonC |
| Hot junction Temperature | Up to 260°C (Max) |
| Cold Junction Temperature | Ambient |
| Connector Type Miniature | Glass filled Nylon |
| Service temperature | -20° to 100°C |
| THERMOCOUPLE READOUT | |
|---|---|
| Sensor Type | T-Copper-Constantan |
| Input | Two |
| Display | Two 4 ½ digit + one 6 digit |
| Range | -200° to 400°C |
| Accuracy | 0.05 % |
| Alarms | High/Low (audible) |
GDS has a variety of instruments for hire, these Instruments, Readouts and Dataloggers are available for product hire on a short-term (fortnightly) or long-term (monthly) basis including, but not limited to, the following:
